When specified for outdoor use, the cabinet should be protected at the top by a rainhood. The non-ventilated cabinet with rainhood has a protection degree IP55.

Locks - Profile half cylinder type 1.18, .20

Optional adjustable component mounting hardware which may be used instead of or in conjunction with back plates for component mounting and positioning. Adjustable hardware slots onto molded-in-place studs on enclosure sides and consists of:

4 -Mounting brackets for affixing to enclosure side
2 -Vertical rails adjustable to 3 positions on brackets
4 -Toothed adjustable bars (adjustable vertically and
horizontally on vertical rails). Provides absolute flexibility
in positioning components. Select from table left.

Maintains UL Listing, Flat Gasket

Horizontal Coupling
Interfacing side panels can be left in to give two separate compartments, or left out to give access between compartments.

Vertical Coupling
Interfacing top/bottom panels may have to be left in when coupling some enclosures, such as 30 x 20, 40 x 30, 50 x 40 and 50 x 30. In these instances, access between vertically coupled compartments can be obtained by making cutouts in the top/bottom panels.

We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors.

About Us • FAQ • Services • Terms & Conditions • Policies

Since 1983