APO Accessories

APO sizes range consists of nine sizes from 7 inch x 6 inch to 24 inch x 24 inch with varying depths.

• All APO enclosures have the capability to be horizontally or vertically coupled by means of gasketed coupling collars.

• All bases are gray (RAL 7036) and are hot compression molded with fiberglass reinforced polyester.

• Brass M4 threaded inserts are factory installed for attachment of mounting plates.

• Covers are made of either clear polycarbonate or opaque gray (RAL7036) hot compression molded fiberglass reinforced polyester.

• APO enclosures meet Ingress Protection standard IP67-11 and IP67-9, respectively (NBN C20-001 annex A).

• Large APO enclosures are maintenance free and corrosion resistant.

• Four to six bosses suitable for M6 threaded inserts are provided in each base.

• APO enclosures are suitable for wall or pole mounting.

• These enclosures may easily be modified with conventional tools such as a drill, milling equipment, saw or a punch.

• Vynckier's APO enclosures are capable of withstanding continuous temperatures up to 302 F (150 C).

• Clear polycarbonate covers are able to resist temperatures of up to 248°F (120°C).

• APO enclosures provide protection for equipment and operators from indirect electrical contact.

• APO enclosures are UL listed per UL Standard 508 and CSA Certified per Standard C22.2-0, 0.4, 0.7, 0.6, 94 Type 3, 3R, 4, 4X, 12 and 13.

Designed for use as insulated electrical junction boxes, terminal wiring boxes, instrument housings, and electrical control enclosures in highly corrosive environments. Ideal for use in most petro-chemical plants, sewage plants, electroplating plants, etc. that may be subject to occasional submersion. Clear polycarbonate cover provides easy visual inspection of interior components.

IEC 439-1; IEC 529 - Rated IP67-11; EN 60439-1; EN 60529; CSA Certified per C22.2 No. 94

UL 508 NEMA 3, 3R, 4, 4X,12 and 13; CSA; AS Australian Standards 3131-1991; EExell, NIEB 88B.102.698 U; LLOYD'S Register of Shipping BASEEFA

Nonmetallic feet:These mounting feet have been successfully tested with loads up to 330 lbs.
Stainless steel feet:These mounting feet have been successfully tested with loads up to 330 lbs.
Direct corner mounting:Loads up to 660 lbs. have been successfully tested.  These are tested loads and are below the product limitations. However, for high load applications, direct corner mounting is recommended.

We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors.

About Us • FAQ • Services • Terms & Conditions • Policies

Since 1983