Package includes 2 grids and 4 rivets
Color: Beige
Standard cutout 5"x5"

8.27 x 5.12 x .50
9.00 x 8.50 x 1.00
Color: Beige

Height 1.97 Color: Black, Width reinforcementrib + screws
Made of Vyncolite

Two air vents must be mounted per enclosure sufficient air circulation and prevent condensation.  Complete with template and screws. Air vents are preferably mounted in the upper and lower part of the base.

For safety-lock No. V2432E

Screw IP67, without indication strip
UL listed when factory installed
Detailed drawings available upon request.

Screw-on IP67
UL listed when factory installed on any enclosure
Detailed drawings available upon request.

Features:
-Designed to protect electronic, pneumatic, hydraulic and mechanical equipment requiring protection from low temperatures, condensation and corrosion. The PTC heater unit will maintain a stable temperature environment within enclosures, allowing critical components to perform with consistent reliability for longer periods.
Installation:
-Mount unit at or near the bottom of the cabinet. Improved heat dissipation will be achieved by using two or more smaller heaters wired in parallel. If a technical requirement exists for a specific temperature, regardless of the external ambient temperature, a temperature regulator can be installed. It is recommended 2-3" spacing.
Caution:
-Do not mount on wooden structures.
-Avoid placement near heat-sensitive components

AC 110-120 V

Approval:

UL recognized

The diagram represents a painted, non-insulated fiberglass enclosure mounted in a calm air, building interior. The lowest temperature differential between room temperature and cabinet interior must be 5 K + to prevent humidity and condensation. For outdoor applications, double the heating power requirement.

P_H = Power required installed (W)
P_V = Existing power from components (W)
T = Temperature differential (Kelvin) ambient to cabinet interior
A = F ree-standing switch cabinet area (SQ. FT. )
k = Heat transmission coefficient (W/ SQ. FT. K) convection in quiet air:
      Plastic approx. 0. 28W/ SQ. FT. K
      Printed steel approx. 0. 51W/ SQ. FT. K
      Aluminum approx. 1. 85W/ SQ. FT. K

Example : P_H = T x k x A
                P_H = 5K x 0. 28W/ SQ. FT. K x 50 SQ. FT. =70W
Formula with Solution: P_V = Existing power from components (W)
               P_H = T x k x A - P V

Features:
-Heater-blower with axial fan for ideally forced air circulation
-Compact design
-Quick-clip mounting
-Long service life
-Maintenance free
-Compact heating fan, prevents accumulation of condensation
and ensures an even temperature in switch cabinets.
Applications:
Control panels, Free-standing cabinets, Telecommunication base stations, Cabins, ATM's, Parking control systems

Features:
-Flat heater surface combined with an axial fan produces optimum forced convection of hot air.
-The heating attachment in combination with the axial fan ensures an optimum heat distribution. In case of fan breakdown, overheating will be prevented by a failsafe thermostat.
-Temperature-limiting
-Compact design
Applications:
Control panels, Telecommunication base stations, Free-standing cabinets, Cabins, ATM's, Parking control systems

Approvals:

Note: Other power ranges available upon request           Designed for axial fan sizes 4.69 x 4.69"

Features:
-Easy installation
-Wide adjustment range
-Small dimensions
-Thermostat NC for the control of heaters/ Thermostat NO for the control of filter ventilators, or for switching signal transmitters in the case of overheating.
Applications:
Air temperature control and monitoring, in switch-gear cabinets, Heaters, filter ventilators, heat exchangers, signal transmitters

Features:
-Designed for the control of heaters to increase the dew point at critical humidities of 65% RH or higher. This will retard condensation; thus preventing corrosion and greatly extending the life expectancy of components.
Applications:
Control panels and enclosures, ATM machines, Tool cabinets Control systems, Indicator panels

Features:
-In tightly closed control panels, no pressure compensation can take place at temperature variations (e. g. day/ night operation). This involves the risk, that, due to the depression, dust and humidity is absorbed into the control panel.
-Easy installation
-High efficiency
-Especially designed to permit a controlled pressure compensation. High protection type of the pressure compensation plug (IP 45), does not affect the protection type of the control panels.

Features:
-Electronic temperature controller and humidity controller for the independent detection of relative humidity and temperature.
-Temperature and humidity are independently adjustable
-High-switching capacity
-Optical indication of function
-The electronic temperature controller and hygrostat detects the set temperature and humidity of the ambient air, switching resistive and inductive loads (e. g. heating or cooling appliances).

We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors.

About Us • FAQ • Services • Terms & Conditions • Policies

Since 1983