Electro-Stock,
Inc. Distributor of Electronic Components and Controls
Since 1983
|
Indicator Lights - S-Series SGS & SGT |
||||||||
![]() |
Approvals: UL recognized, CSA certified. |
![]() ![]() ![]() ![]() |
||||||
| Dielectric Strength: | 1250 volts (live parts to ground). | |||||||
| Life: | 35,000 hours average rating. | |||||||
| Insulation Resistance: | 5 megohms. | |||||||
| Lamps: | 6, 12 and 28
volt incandescent lamps standard. 125 and 250 volt neon lamps standard. |
|||||||
| Markings: | Letters, numbers and symbols can be applied to lens or to integral nylon bezel. | |||||||
| Marking Options | ||||||||
|
Engraving: |
Recommended for small to medium production quantities. Standard type: 12 point David. Up to three (3) lines of type, with eight (8) characters per line. Black print standard, white also available. |
![]() |
||||||
| Laser Etching: | Recommended for small to medium production quantities. Please note style of legend orientation when ordering. | |||||||
| Mylar Inserts: | Where marking must be protected against wear, it can be printed on a clear film and set inside the transparent lens cap. Legend inserts can be purchased separately and installed or changed with ease. (For use with flat lens cap) | |||||||
| Pad Printing: | Recommended for medium to high production volumes. Letters, figures, or symbols can be imprinted in standard or custom configurations. White print is standard; color available to meet customer specification. | |||||||
| Ordering Information | ||||||||
| SGS | A | 125V | D | 1 | M9 | B | ||
|
Indicator: SGS (Short) SGT |
Terminal: A = 1/4" Quick Connect B1 = 3/16" Quick Connect C2 = Solder |
Lamp Voltage: 6V = 6 Volt Incandescent 12V = 12 Volt Incandescent 28V = 28 Volt Incandescent 125V = 125 Volt Neon 250V = 250 Volt Neon 6VR = 6 Volt Red LED 6VG = 6 Volt Green LED 12VR = 12 Volt Red LED 12VG = 12 Volt Green LED |
Cap Style: D = Beveled |
Lens Color: 1 = Red 2 = Clear 3 = Amber 4 = Green 5 = Blue |
Housing Color: M9 = Black (For other colors contact factory) |
Accessories: B = Barrier T = Boot E = Epoxy Seal |
||
|
We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors. |
|
About Us •
FAQ •
Services •
Terms & Conditions •
Policies
Hours:
Monday through Friday 8:30am
through 4:00pm CST - Leave Messages On Voice Mail
After Hours. Home | Contact | © 1996 - 2012 Electro-Stock, Inc | Original Design by www.mitchinson.net |