|
Lamb Industries
5000 Series Rocker
and Lever Switch |
|
Single-Quad Pole Rocker and Lever Switch |
|

|
 |
The 5000-Series rocker switch is UL and CSA rated at 5A and
can have up to four poles! This switch can be configured with a
very large variety of terminals, actuators, and contact materials.
A very versatile switch! See the technical details page for more
information. Also available in toggle (5000-Series Toggle) and IP
67 sealed (L000-Series) versions. If a smaller package is needed,
the
T000-Series Rocker may be for you.
|
|
SPECIFICATIONS |
|
Rating: |
UL/CSA Ratings:
Q(M) and G(L) Contact Materials -
5A 125VAC
2A 250VAC
5A 28VDC
B(K) Contact Material -
0.4VA Max. at 20V Max. (AC or DC)
See Technical Details For More Information |
|
Electrical Life: |
50,000 Cycles at Full Load |
|
Contact Resistance: |
Initial:
10mW Max. at 100mA 2-4VDC |
|
Insulation Resistance: |
1,000MW
Min |
|
Dielectric Strength: |
1,500V for 1 Minute |
|
Temperature: |
-30°C to 85°C |
|
MATERIALS |
|
Body: |
Diallyl
Phthalate (DAP), UL 94V-0 |
|
Actuator: |
Chrome Plated Brass |
|
Bushing: |
Stainless Steel |
|
Support: |
Tin Plated Brass |
|
Terminals: |
Q (M): Silver
Plated Copper
G (L): Copper With Gold Over Silver Plating
B (K): Copper With Gold Over Nickel Plating
See The Technical Details Page For More Information |
|
Contacts: |
Q (M): Silver Plated Copper
G (L): Copper With Gold Over Silver Plating
B (K): Copper With Gold Over Nickel Plating
See The Technical Details Page For More Information |
|
ORDERING |
|
Function |
Actuator |
Termination |
Contact
Material |
Seal |
Actuator
Color |
Bezel
Color |
Marking Color |
Marking
Type |
 |
 |
 |
 |
 |
 |
 |
 |
 |
1 Pole:
5101 - On-On
5102 - Off-On
5103 - On-Off-On
5105 - (On)-Off-(On)
5107 - On-Off-(On)
5108 - On-(On) (End-End)
5109 - On-(On) (Middle-End)
2 Pole:
5201 - On-On
5202 - Off-On
5203 - On-Off-On
5205 - (On)-Off-(On)
5207 - On-Off-(On)
5208 - On-(On) (End-End)
5209 - On-(On) (Middle-End)
5211 - On-On-On
5213 - On-On-(On)
5215 - (On)-On-(On)
3 Pole:
5301 - On-On
5302 - Off-On
5303 - On-Off-On
5305 - (On)-Off-(On)
5307 - On-Off-(On)
5308 - On-(On) (End-End)
5309 - On-(On) (Middle-End)
4 Pole:
5401 - On-On
5402 - Off-On
5403 - On-Off-On
5405 - (On)-Off-(On)
5407 - On-Off-(On)
5408 - On-(On) (End-End)
5409 - On-(On) (Middle-End)
5411 - On-On-On
5413 - On-On-(On)
5415 - (On)-On-(On)
|
Standard:
J1
J2
J3
J4
J10
Panel Mount
With Bezel:
J51
J61
Panel Mount
Without Bezel:
J50
J60 |
Standard:
Z
Z3
C
W
W1
W3
W4
PC Board:
A
AV2
V1
V2
V3
V4
V6
V7
Snap-In
PC Board:
A3
AV3
V11
V21
V31
V41
V61
V71 |
Standard:
Q
G
B
Tin
Coated:
M
L
K |
None -
No Epoxy
E - Epoxy Seal |
1 - White
2 - Black (Std.)
3 - Red
4 - Orange
5 - Yellow
6 - Green
7 - Blue
8 - Brown
9 - Gray |
None
1 - White
2 - Black (Std.)
3 - Red
4 - Orange
5 - Yellow
6 - Green
7 - Blue
8 - Brown
9 - Gray |
None
1 - Black
2 - White
8 - Red |
None
1 - I/O Vert.
3 - ON/OFF Vert.
R - I/O Horiz. |
|
The On-On versions of
the above switches with Q, G, M, or L plating options are available
with reinforced contacts for 6A 125VAC electrical loads (this option
is not approved by UL). This option is denoted by replacing the 5 at
the beginning of the part number with a 6. For Example; 5101-J1ZQE2
becomes 6101-J1ZQE2. |
|
SWITCH
SCHEMATIC |
 |
|
ACTUATOR
OPTIONS |
 |
|
TERMINAL
OPTIONS |
 |
|
PLATING
OPTIONS |
|
Q (M) -
Standard contact. Copper alloy with silver plating
G (L) - Gold plating over a standard (Q) silver
contact
Electrical Rating: 5A 125VAC, 2A 250VAC, 5A 28VDC
B (K) - Copper Alloy contact with gold plating over
nickel plating
Electrical Rating: 0.4VA Max. and 20V Max. (AC or DC)
(Use M, L, or K code if tin coating on external portion of terminals
is desired) |