Electro-Stock,
Inc. Distributor of Electronic Components and Controls
 |
 |
ZP1 and ZP2 Mounting Inserts - With a quarter turn ZP1-is used to mount components and SEP-E separators inside duct.ZP2 can be mounted inside duct. By stacking, mounting levels at different heights are achieved. Material:
Polyamide 6 |
| Ordering Information | ||
| Catalog Number |
Pieces per Carton |
|
| ZP 1 | 100 | |
| ZP 2 | 50 | |
|
With a simple quarter turn ZP1 is used to mount components and SEP-E separators inside duct. Also ZP1 can be used to mount smaller sizes of duct inside larger sizes, thus achieving separation of circuits with different voltages and/or functions. With a simple quarter turn ZP2 can be mounted inside duct. By stacking, mounting levels at different heights are achieved. For tightening a wire bundle inside duct, pass a cable tie through ZP2. |
||
|
We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors. |
|
About Us •
FAQ •
Services •
Terms & Conditions •
Policies
Hours:
Monday through Friday 8:30am
through 4:00pm CST - Leave Messages On Voice Mail
After Hours. Home |
contact |
© 1996 - 2008 Electro-Stock, Inc | Original Design by
www.mitchinson.net | Licensed under a
Creative Commons Attribution 3.0 License
|
