you are here > Lines Carried > IBOCO > Wiring Duct > Technical Characteristics

IBOCO Wiring Duct - Technical Characteristics

 

Wiring Duct - Technical Characteristics

IBOCO Wiring products respond to all installation needs, coping with different uses and environment applications. They are manufactured with high quality materials that undergo severe quality controls and performance tests under extreme operating and duration conditions witha constant control of quality standards.
Wiring Ducts T1, T1E, SEP-E and CL are manufactured in rigid Self-Extinguishing PVC.
Those components for which high bending resilience is required are in polyamide 6 and polypropylene.
Spiralite is manufactured in natural polyethylene and self-extinguishing polyethylene.
 
Materials
Technical Characteristics		 Unit of Measure Standard PVC Duct Value PVC Molded Components Value Polyamide 6 Value Polyethylene Value Flame Retardant Polyethylene
Value
 
Chemical - Physical Properties
Specific gravity g/cm^3 ASTM D792 1.55 1.32 1.14 0.92 0.97
H2O 73,4° F absorbtion % ISO 62 <0,1 2,5 2,5 <0,1 <0,1
Formaldehyde ppm - absent absent absent absent absent
Cadmium ppm - absent absent absent absent absent
 
Materials
Technical Characteristics		 Unit of Measure Standard PVC Duct Value PVC Molded Components Value Polyamide 6 Value Polyethylene Value Flame Retardant Polyethylene
Value
 
Mechanical Properties
Tensile stress at break MPa ASTM D638 39 30 45 17 15
Traction strength MPa ASTM D638 44 27 55 9,5 9
Elongation at break % ASTM D638 130 97 250 400 600
Modulus of elasticity at traction MPa ASTM D638 4400 - 950 - 240
Modulus of elasticity at flexion MPa ASTM D790 3200 - 1100 210 130
Return to top
Materials
Technical Characteristics		 Unit of Measure Standard PVC Duct Value PVC Molded Components Value Polyamide 6 Value Polyethylene Value Flame Retardant Polyethylene
Value
 
Thermal Properties
Temperature VICAT °C ASTM D1525 84 70 198 89 -
HDT °C ASTM D648 72 60 185 - -
Coefficient of expansion K^-1 ASTM D696 6
10^-5		 8 10^-5 8-10
10^-5		 22
10^-5		 10^-5
Specific heat kJ/kgK ASTM C351 0,94 1,24 1,7 - -
Thermal conductivity W/mK ASTM C177 0,14 0,14 0,29 0,32 0,32
 
Materials
Technical Characteristics		 Unit of Measure Standard PVC Duct Value PVC Molded Components Value Polyamide 6 Value Polyethylene Value Flame Retardant Polyethylene
Value
 
Electrical Properties
Dielectric constant - ASTM D150 3,2 - 4,0 3,2 5,0 2,4 2,3
Dielectric strength kV/mm IEC 243 70 60 35 90 90
Surface resistance Ohm IEC 93 10^13 10^13 5 10^11 10^13 10^13
 
Materials
Technical Characteristics		 Unit of Measure Standard PVC Duct Value PVC Molded Components Value Polyamide 6 Value Polyethylene Value Flame Retardant Polyethylene
Value
 
Self-Extinguishing
Self-extinguising 1,6 millimeters - UL 94 V0 V0 V2 HB V2
Self-extinguishing 3,2 millimeters - UL 94 V0 V0 V2 HB V2
Glow wire test
(2 mm)		 °C IEC 695-2-1 960 960 650 650 850
Oxygen number % ASTM D2863 43 34 25 - 25
Return to top

 

We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors.

About Us • FAQ • Services • Terms & Conditions • Policies

Since 1983   

Hours: Monday through Friday 8:30am through 4:00pm CST - Leave Messages On Voice Mail After Hours.
Phone: 630-682-1542          
Order Line: 800-876-1152 (USA Only, Not Illinois)
Email: sales@electrostock.com         Mail & Remit To: 1218 E. Wilson Ave. Wheaton, IL 60189-6748 USA

 Home | Contact | © 1996 - 2012 Electro-Stock, Inc | Original Design by www.mitchinson.net