you are here > Lines Carried > Feller, LLC > World Wide Jumper Cord Sets

FELLER, LLC World Wide Jumper Cord Sets

 

Meets requirements of North American and International Safety Agencies
Plug Standard: IEC320/EN60320-2.2/E, Feller type C14G, C16G
Cord Connector: IEC320/EN60320/C13, C15 Feller type C13, C15

  • Jumper Cords are used to power accessories. Both ends, the shrouded male and the female are per the IEC 320 standard for worldwide use.

  • Feller can build a variety of fully molded jumper cords with ratings from 2.5A up to 20A for Class I and Class II equipment, including cords for "hot" conditions.

  • A Feller specialty is the "universal cordage" that is used to build jumper cords. It is harmonized, UL listed, CSA certified and approved in Australia. The respective markings and type designations are embossed on the outer jacket. The Feller type designations are HARSVT and HARSJT.

  • "Universal" cords eliminate the need to have separate cords for North American and International markets, enabling OEM`s to reduce inventory.

  • Plugs, connectors and universal cordage bear the CE-mark
NOTE: UL and CSA rate the C20 plug and the C19 connector at 20A/250V. The C20 and the C19 are available in right or left angled versions. If shielding is a requirement, cordage is also available with foil and copper shielding. Our sales department will be glad to assist you.
 Universal Jumper Cords For Class I Equipment 2.5A-20A / 250V
  Part Number Current/ Voltage Rating Cordage Connector Style Length Color
3517-840-0-3001 2.5A/125V HARSVT3x0.75mm² straight/C5 3'3"(1.0m) black
             
3522-00 10A/250V HARSVT3x18AWG straight/ C13 3'3"(1.0m) black
3522-01 6'7"(2m)
3522-02 8'2"(2.5m)
3522-03 10'(3m)
             
3522-04 10A/250V HARSJT3x18AWG straight/ C13 3'3"(1.0m) black
3530-620-0-6001 6'7"(2m)
3522-05 8'2"(2.5m)
3530-620-0-1001 10'(3m)
  Part Number Current/ Voltage Rating Cordage Connector Style Length Color
3530-640-0-6001 15A/250V HARSJT3x14AWG straight/ C13 9'2"(2.8m) black
             
C14 3537-341-0-4001 13A/250V SJT3X16AWG straight/ C15 2'5"(0.76m) black
             
C16 4637-230 10A/250V H05VVF3G1.00mm² straight/ C15 8'2"(2.5m) black
  Part Number Current/ Voltage Rating Cordage Connector Style Length Color
C16 4637-340 13A/250V SJT3X16AWG straight/ C15 8'2"(2.5m) black
If you need the real power! Both ends fully molded - no assemblies necessary !
Plug Standard: IEC320/EN60320-2.2I, Feller type C20 Cord Connector:
IEC320/EN60320/C19, Feller type C19
  Part Number Current/ Voltage Rating Cordage Connector Style Length Color
4041-240 International use only 16A/250V H05VVF3G1.5mm² straight/ C19 8'2"(2.5m) black
             
4041-640 16A/250V universal type HARSJT3x14AWG straight/ C19 10'(3m) black
4041-640-0-0001 8'2"(2.5m)
4041-640-0-5001 13'2"(4m)
4041-640-0-4001 2'2"(0.65m)
             
4041-360 N.A. use only 20A/250V SJT3X12AWG straight/ C19 8'2"(2.5m) black

 

We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors.

About Us • FAQ • Services • Terms & Conditions • Policies

Since 1983   

Hours: Monday through Friday 8:30am through 4:00pm CST - Leave Messages On Voice Mail After Hours.
Phone: 630-682-1542  Fax: 630-682-1562             Order Line: 800-876-1152 (USA Only, Not Illinois)
Email: sales@electrostock.com         Mail & Remit To: 1218 E. Wilson Ave. Wheaton, IL 60187 USA

 Home | contact | © 1996 - 2008 Electro-Stock, Inc | Original Design by www.mitchinson.net | Licensed under a Creative Commons Attribution 3.0 License