you are here > Lines Carried > E-Rail > DIN Rail Cutting Tools

E-Rail DIN Rail Cutting Tools

  E-Rail offers 6 families of DIN rail and wire duct cutters with a wide range of capabilities, for any size of electrical or panel workshop.

E-Rail DIN Rail Cutting Tools
Features:
  • Fast operation - Up to 1,000 cutting and punching cycles per hour (electric models).
    Economy - Minimal maintenance. Punching feature permits use of the more economical solid rails instead of pre-punched profiles. Large time saving versus traditional hand sawing, filing and deburring.
    Precision - Straight, perpendicular cuts, without burrs or deformation of the rail. No need for filing or finishing. Repeat cuts within 1mm length tolerance.
    Simple, safe operation - All models need no specialized skills or training to operate. Electric and pneumatic models have safety dual commands in compliance with safety regulations.
Type ECM-400  DIN Rail Cutter
 New # 510.701
  •  
    •
  • Light weight industrial grade cutter/puncher that provides burr-free precision cutting.
  • This rail multi-profile rail cutter cuts the 15 x 5, 35 x 7.5, & 35 x 15 mm DIN rail. It also cuts our 35 mm aluminum rail.
  • Easy to use and maintenance free.
  • # 510.702 Optional adder ruler and end stop.
Type PDRC - Portable, Light Weight, Hand-Held DIN Rail Cutter
# 510.801 
  • Fully portable: No bench mounting.
  • SMALL, Only 13.5" x 2.75" x 4.75".
  • Easily cuts all 35 mm x 7.5 mm DIN rails.
  • Easy to use and maintenance free.

Download PDRC pdf Manual

Type DCRP - Economical and Light Weight Bench-Mount Multi-Profile Cutter/Puncher
# 510.601
  • Light weight industrial grade cutter/puncher that provides burr-free precision cutting.
  • Cuts and punches all four major types of DIN rail.
  • Easy to use and maintenance free.
  • Comes standard with a one meter measuring guide and rail stop.

Download DCRP pdf Manual

Type ALC-02/US A State-Of-The-Art, Easy To Use, Multi-Profile Rail Cutter
#510.520  ALC-02/US DIN Rail Cutter

A state-of-the-art, easy-to-use rail cutter that cuts:

  • DIN RAIL 35mm/7.5 according to EN 50 022
  • DIN RAIL 35mm/15 according to EN 50 022
  • High Rise Aluminum DIN Rail

Comes standard with a one-meter measuring guide and rail stop.

Download ALC-02/US pdf Manual
 
Type A3001 Heavy Duty, Bench-Mount, Multi-Profile Shear Type Cutter/Puncher
# 510.501  A3001  Manual cutter with punch and rail guide
# 510.512  03005  Spare punch/die-hole 6.3 x 12mm
# 510.513  03007  Spare punch/die-round hole 5.5mm
# 510.514  03008  Spare punch/die-round hole 6mm
  1. Easy to install and transport, these machines are available with either manual or hydraulic operation. Hydraulic models are operated by means of any hand. Pedal, electric or pneumatic power pack.
    2.
  2. Comes standard with all four dies.
  3. Easy operation with practically no maintenance.
  4. Special shearing tools for non-standard profiles, as well as special punching dies are available upon request.
  5. A one-meter measuring guide with rail stop comes standard with each machine.

Download A3001 pdf Manual
 
TYPE GH Heavy Duty, high-speed tool for combined cutting/punching of any type and size DIN rail
3 models are available
# GH3M  Manual operation, bench mounted
 # GH3P  Pneumatic operation, floor mounted
# 510.300  GH3M  Manual cutter/puncher
# 510.310  GH3E  Electric cutter/puncher 100V 60 Hz
# 510.320  GH3P  Pneumatic cutter/puncher
# 510.351  M31  Cutting die for ER-32 rail (2 pieces)
# 510.352  M32  Cutting die for ER-35 rail (2 pieces)
# 510.353  M33  Cutting die for ER-35HP rail (2 pieces)
# 510.354  M34  Cutting die for ER-35HD rail (2 pieces)
# 510.355  M35  Cutting die for ER-15 rail (2 pieces)
# 510.361  RG  Rail Guide and End Stop
# 510.371  L33  Replacement cutting blade
# 510.372  P33   Replacement punch set (2 pieces)
  1. Fast and efficient with up to 1.000 cutting and punching cycles per hour. (electric model only)
  2. All models cut and punch the rail (at both edges of the cut) in one operation.
  3. Special cutting dies for different profiles, as well as different punching dies, are available upon special order.
  4. An optional one-meter steel rail with rail stop is available.
Type VKS125 A Safe, Accurate, And Easy To Use, High Precision Wire Duct Cutter
# 530.100  VKS125 Wire Duct Cutter

Save time and money with the VKS125 wire duct cutter.

  1. Quickly cuts any type and size of wire duct (including covers)
  2. Each and every cut is clean and on a perfect 90 degree angle
  3. Comes standard with a 1 meter measuring guide and end stop

Download VKS125 pdf Manual

 

We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors.

About Us • FAQ • Services • Terms & Conditions • Policies

Since 1983   

Hours: Monday through Friday 8:30am through 4:00pm CST - Leave Messages On Voice Mail After Hours.
Phone: 630-682-1542  Fax: 630-682-1562             Order Line: 800-876-1152 (USA Only, Not Illinois)
Email: sales@electrostock.com         Mail & Remit To: 1218 E. Wilson Ave. Wheaton, IL 60189-6748 USA

 Home | contact | © 1996 - 2008 Electro-Stock, Inc | Original Design by www.mitchinson.net | Licensed under a Creative Commons Attribution 3.0 License