|
You are here: >
Lines Carried >
Dinkle > Panel Mounting
Terminal Blocks |
 |
|
|
Dinkle Panel Mounting
Terminal Blocks |
|
 |
PM
Series are small type panel mounting terminal
block. Three wire sizes, 2.5m¢T, 4m¢T, and 10m¢T are available
now. The single units can be combined together by heavy duty buckles
for any size. The wire sizes of 2.5m¢T and 4m¢T can be mixed for
assembly together. The series can be matched with standard marking
labels. For the longer sizes, we can add a spacer with buckles to
strengthen the firmness of the terminal blocks. |
 |
WPMS
Series is the panel mounting style with
spring clamp DIN Rail terminal blocks, which is designed for
fitting the wire size of 2.5mm2. The series provide high
reliability, anti-vibration, rapid wire connections, and saving the
assembly time. The entry holes are parallel with installation tool,
this is quite proper to apply in limited space. Due to each spring
clamp can be connected with one lead wire only, there are 2
connectors per piece and 4 connectors per piece for the connection
requirement. WPMS series can be matched with suitable jumpers and
standard marking labels. New design is proceeding. The series are
with 2 connectors per piece and 4 connectors per piece for options.
The single parts can be combined together by heavy duty buckles for
any size. The longer sizes can be added a spacer with buckle to
strengthen the firmness of the terminal blocks. The design of the
product is conform to IEC60998 and UL1059 international standard. |
 |
WPM
Series is the panel mounting style with spring
clamp DIN Rail terminal blocks, which is designed for fitting
the wire size of 2.5mm2. The series provide high reliability,
anti-vibration, rapid wire connections, and saving the assembly
time. The entry holes are parallel with installation tool, this is
quite proper to apply in limited space. Due to each spring clamp can
be connected with one lead wire only, there are 2 connectors per
piece and 4 connectors per piece for the connection requirement. WPM
series can be matched with suitable jumpers and standard marking
labels. New design is proceeding. The series are with 2 connectors
per piece and 4 connectors per piece for options. The single parts
can be combined together by heavy duty buckles for any size. The
longer sizes can be added a spacer with buckle to strengthen the
firmness of the terminal blocks. The design of the product is
conform to IEC60998 and UL1059 international standard. |
 |
WDK Series
is the spring clamp DIN Rail terminal blocks, which is designed
for fitting the wire size of 2.5m¢T. The series provide high
reliability, anti-vibration, rapid wire connections, and saving the
assembly time. The entry holes are parallel with installation tool,
this is quite proper to apply in limited space. Due to each spring
clamp can be connected with one lead wire only, there are 2
connectors per piece and 4 connectors per piece for the connection
requirement. WDK series can be matched with suitable jumpers and
standard marking labels.
The series are with 2 connectors per piece and 4 connectors per
piece for options. The single parts can be combined together by
heavy duty buckles for any size. The longer sizes can be added a
spacer with buckle to strengthen the firmness of the terminal
blocks. The design of the product is conform to IEC60998 and UL1059
international standard. |
 |
TKE Series are designed for a special purpose on
the transformer with two wire sizes, 12.5mm and 16.1mm. The
series can be selected for single pin and dual pin design. The upper
releasing protective cover won¡¦t affect the wire connections. TKE
series can be fixed on the DIN rails mounting, thus the user can fix
the terminal block on the transformers and get the safe, clean, and
uniform wire connections. The series can be matched with suitable
marking labels. The design of the product is conformed to IEC60998
and UL1059 international standard. |
|
