 |
   Since 1983 |
| Home | About Us | Lines Carried | Product Index | Sale Items | Search This Site | Request Form |
| FAQ | Services | Terms & Conditions | Policies | Line Card (pdf) | Terms (pdf) | Credit Application (pdf) |
| You are here: > Lines Carried > Dinkle > DIN Rail Terminal Blocks | ||
 |
||
|
 |
DK series are the DIN Rail terminal blocks,
which are designed for fitting both TS-32 and TS-35 DIN Rails. The
series is using steel yoke as the fixture to tight up the wire
connections and the structure can be anti-vibration, prevent from
wire loosing, enlarge the contact point and get to high reliability
of product. The series provide the wire size from 1.5mm2 up to
240mm2. The shape of the whole series is also in standard design,
which can make the wire connections in order, clear, and much better
appearance. DK series can be matched with any type of jumpers and
labels. The design of the product is conformed to IEC60998 and
UL1059 international standard and acquires the approvals of CUL, UL
and VDE. The main purpose of each Part Number under DK series. DK: two contacts, circuit with one line-in and one line-out. |
 |
DDK series are the DIN Rail terminal blocks,
which are designed for fitting both TS-32 and TS-35 DIN Rails. The
series is using steel yoke as the fixture to tight up the wire
connections and the structure can be anti-vibration, prevent from
wire loosing, enlarge the contact point and get to high reliability
of product. The series provide the wire size from 1.5mm2 up to
240mm2. The shape of the whole series is also in standard design,
which can make the wire connections in order, clear, and much better
appearance. DK series can be matched with any type of jumpers and
labels. The design of the product is conformed to IEC60998 and
UL1059 international standard and acquires the approvals of CUL, UL
and VDE. The main purpose of each Part Number under DDK series. DDK: four contacts are divided into two circuits; each circuit is 1-in-1-out. |
 |
UDK series are the DIN Rail terminal blocks,
which are designed for fitting both TS-32 and TS-35 DIN Rails. The
series is using steel yoke as the fixture to tight up the wire
connections and the structure can be anti-vibration, prevent from
wire loosing, enlarge the contact point and get to high reliability
of product. The series provide the wire size from 1.5mm2 up to
240mm2. The shape of the whole series is also in standard design,
which can make the wire connections in order, clear, and much better
appearance. DK series can be matched with any type of jumpers and
labels. The design of the product is conformed to IEC60998 and
UL1059 international standard and acquires the approvals of CUL, UL
and VDE. The main purpose of each Part Number under UDK series. UDK: four contacts shorted in one common point, can be connected for 3-in-1-out, 2-in-2-out or 1-in-3-out circuit. |
 |
GK series are the Grounding design of DIN Rail terminal blocks, which are designed for fitting both TS-32 and TS-35 DIN Rails. The whole series provides the wire size from 1.5m¢T up to 95m¢T. The shape of the whole series is also in standard design, which can make the wire connections in order, clear, and much better appearance. GK series can be matched with the suitable marking labels. The design of the product is conformed to IEC60998 and UL1059 international safety standard. Most of the product has acquired the approvals of CUL, UL, and VDE. |
 |
KDK series are the disconnect DIN Rail
terminal block which are designed for fitting both TS-32 and TS-35
DIN Rails. The series can be matched with suitable jumpers and
marking labels. The design of the product is conformed of IEC60998 and UL1059 international standard. |
 |
DKTL6 and DKTD6 can be applied at a simple
secondary sensorial current loop and at all kinds of testing
connections. On the vertical direction, there are staged slide
cores, which can make a stable and staged horizontal connection.
Besides, they attached auxiliary test plug terminals, which can be
plugged in by a test stick of 4mm, so that we can check the signals
in the testing circuit. Comparing with the hole through terminal
blocks, this series can spare the space of terminals and need the
least accessories. They are more convenient to install, easier to
distinguish the circuit and simpler to operate. DKT: can be connected vertical or horizontal, Suitable for testing. |
 |
FDK series is the DIN Rail terminal block with fuse, which is designed for fitting both TS-32 and TS-35 DIN Rails. According to the needed requirement, the series can be installed with LED indicator. FDK series are fitted with the standard fuse of diameter of 5mm. In addition, with the upper unsealed switch, it is easy to change the fuse. |
 |
D3KS2.5 and D3KS2.5G series are multiple level
design products and designed for fitting TS-35 DIN rail. Besides,
they can work with sensors to operate the control of circuit
connection. In additional, D3KS2.5G is designed as the structure of
grounding to proceed the grounding circuit connection directly. We provide this series with the wire range from 0.35 to 2.5 m¢T. The shape of assembly is clear and uniformed. Both jumpers and marking labels are available for needed connection and identification. The design is in according with IEC60998 and UL1059 international standard. |
 |
DKES1.5 is the DIN Rail terminal block design, which provides the socket connection with the plug. It is designed for fitting both TS-32 and TS-35 DIN rails. There are two options on the socket, from top and side entry, or join two sets of plugs together, the other socket can be protected by cover. Please kindly contact us for different kinds of specification for the plug matching. The series can be matched with suitable jumpers and marking labels. The design of the product is conformed to IEC60998 and UL1059 international safety standard. |
 |
DZKM series is design for fitting electrical switch panel, control panel and grounding subway, DZKM35 can be installed into the panel independently or by the help of DIN-rail. |
 |
SK series are the spring clamp design of DIN Rail terminal blocks, which are designed for fitting both TS-32 and TS-35 Din Rails. Efficient wire connections, saving the assembly time, the wire entry holes are parallel with wiring tool. This is quite proper to apply in limited space. Due to each spring clamp can be connected with one lead wire, there are 2 connectors per piece and 4 connectors per piece for the connection requirement. At present, three wire specifications, 2.5mm2, 4mm2, and 6mm2, can be matched with suitable jumpers and standard marking labels. New design is proceeding. The design of the product is conformed to IEC60998 and UL1059 international standard. |
 |
SGK series are the spring clamp design of DIN Rail grounding terminal blocks, which are designed for fitting both TS-32 and TS-35 Din Rails. Efficient wire connections, saving the assembly time, the wire entry holes are parallel with wiring tool. This is quite proper to apply in limited space. Due to each spring clamp can be connected with one lead wire, there are 2 connectors per piece and 4 connectors per piece for the connection requirement. At present, three wire specifications, 2.5mm2, 4mm2, and 6mm2, can be matched with suitable jumpers and standard marking labels. New design is proceeding. The design of the product is conformed to IEC60998 and UL1059 international standard. |
