you are here > Lines Carried > Conta-Clip > Tools - Ferrule Crimping & Screwdrivers

Conta-Clip, Inc. - Tools - Ferrule Crimping & Screwdrivers

Tools - Ferrule Crimping & Screwdrivers

CONTA-CLIP Tools include a selection of hand operated Ferrule-Crimpers and Straight Blade Screwdrivers. Ferrule-Crimpers are used to mechanically crimp Ferrules onto wires and cables. Ferrule-Crimpers are manufactured to exacting mechanical specifications to obtain the best possible connection between the ferrule and conductor. Straight Blade Screwdrivers are used to tighten or loosen the screws in Conta-Clip’s Screw Clamp Terminal Blocks and to open the clamps of our Spring Clamp Terminal Blocks.

 
Ferrule Crimping Tools

Conta-Clip  are used to mechanically crimp Insulated and Un-insulated Ferrules onto wires and cables. They are manufactured to exacting specifications ensuring the best possible connection between the Ferrule and conductor.
Choose from Front or Side wire Entry Crimpers with one or individual crimp cavities.
• Positive ratcheting with emergency release
• Provide maximum crimp force with reasonable hand pressure
• Designed to reduce hand stress
• Featuring hardened dies and steel frames (PZU4 plastic frame)

Single Crimp Cavity
Cat. No: 1464.0
AWG Wire Size: 20-12
mm2 Ferrule Size: .5-4.0
Multiple Crimp Cavities
Cat. No: 3055.0
AWG Wire Size: 26-10
mm2 Ferrule Size: .14-6.0
Single Crimp Cavity
Cat. No: 1100.0
AWG Wire Size: 26-10
mm2 Ferrule Size: .14-6.0
Single Crimp Cavity
Cat. No: 1465.0
AWG Wire Size: 8-6
mm2 Ferrule Size: 10.0-16.0
 
PZU 25
Side Wire Entry		 PZU 35
Side Wire Entry		 PZU 50
Side Wire Entry		 PZU 16/E
Side Wire Entry

Multiple Crimp Cavities
Cat. No: 3057.0
AWG Wire Size: 8,6,4
mm2 Ferrule Size: 10, 16, 25
Multiple Crimp Cavities
Cat. No: 1466.0
AWG Wire Size: 4,2
mm2 Ferrule Size: 25, 35
Single Crimp Cavity
Cat. No: 1467.0
AWG Wire Size: 1/0
mm2 Ferrule Size: 50
Multiple Crimp Cavities
Cat. No: 3056.0
AWG Wire Size: 20-6
mm2 Ferrule Size: 0.5-16.0
 


Front Wire Entry
Side Wire Entry
Return to top
Screwdrivers
 
SDI - Straight Blade
 Insulated		 Cat. No. / Unit pack Type Length of Blade
1081.0 / 1 SDI 0,4 x 2,5 75 mm
1082.0 / 1 SDI 0,6 x 3,5 100 mm
1083.0 / 1 SDI 1,0 x 5,5 125 mm
1084.0 / 1 SDI 1,2 x 6,5 150 mm
 
SDB - Straight Blade
Un-insulated		 Cat. No. / Unit pack Type Length of Blade
1085.0 / 1 SDB 0,5 x 3,0 75mm
1086.0 / 1 SDB 0,6 x 3,5 100 mm
1087.0 / 1 SDB 0,8 x 4,0 125 mm
1088.0 / 1 SDB 1,2 x 6,5 150 mm
 
SDK - Phillips Insulated Cat. No. / Unit pack Type Length of Blade
2278.0/1 SDIK 1 x 80 80 mm
2279.0/1 SDIK 2 x 100 100 mm
 
SDK - Phillips
Un-insulated		 Cat. No. / Unit pack Type Length of Blade
2289.0/1 SDK 1 x 6,0 80 mm
2290.0/1 SDK 2 x 100 100 mm
 
ISKS - Allen Key Cat. No. / Unit pack Type Length of Blade
2818.0/1 ISKS 5 100 mm
2772.0/1 ISKS 6 100 mm
2773.0/1 ISKS 8 100 mm
Return to top

 

We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors.

About Us • FAQ • Services • Terms & Conditions • Policies

Since 1983   

Hours: Monday through Friday 8:30am through 4:00pm CST - Leave Messages On Voice Mail After Hours.
Phone: 630-682-1542          
Order Line: 800-876-1152 (USA Only, Not Illinois)
Email: sales@electrostock.com         Mail & Remit To: 1218 E. Wilson Ave. Wheaton, IL 60189-6748 USA

 Home | Contact | © 1996 - 2012 Electro-Stock, Inc | Original Design by www.mitchinson.net