you are here > Lines Carried > Conta-Clip > DIN Rail Terminal Blocks & Accessories > Spring Clamp, Ground Terminal Blocks

Conta-Clip, Inc. - DIN Rail Terminal Blocks & Accessories - Spring Clamp, Ground Terminal Blocks

DIN Rail Terminal Blocks & Accessories - Spring Clamp, Ground Terminal Blocks

Top, Wire Entry/Clamp Access
Single and Dual Level
Low Profile, Sectional Design
Mount on 35mm DIN Rail
Polyamide 6.6 VO
Stainless Steel Spring
Standard Color: Green/Yellow

A modern, high density terminal block system especially designed to satisfy screwless, top wire entry requirements. Top wire entry and top clamp actuation allow DIN Rail Terminal Block Assemblies to be installed into areas where available space is limited or difficult to access. A compact, low profile housing design makes them ideal for restricted height applications.
Use screwless, spring clamp terminal blocks to speed factory/field wiring and to provide significant installation cost savings.
A wide conductor range (20-8 AWG) can be accommodated and terminal blocks for two, three and four wire terminations can be selected.
 
  ZSL 2.5/2A
5mm (.197 in.) Width		 ZSL 2.5/3A
5mm (.197 in.) Width		 ZSL 2.5/4A
5mm (.197 in.) Width		 ZSLD 2.5
5mm (.197 in.) Width
 
 
Dimensions:
B x W x H† mm (in.)		 59 x 5 x 39
(2.32 x .197 x 1.54)		 71.3 x 5 x 39
(2.81 x .197 x 1.54)		 83.6 x 5 x 39
(3.29 x .197 x 1.54)		 84 x 5 x 53
(3.31 x .197 x 2.09)
Ordering Information: Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack
  3510.2 100 3511.2 100 3512.2 100 3567.2 100
 
Electrical Ratings:        
IEC 947-7-1 0.5-2.5mm2 0.5-2.5mm2 0.5-2.5mm2 0.5-2.5mm2
CSA/CUL File No. LR 42110 20-12 AWG 20-12 AWG 20-12 AWG 20-12 AWG†
C/US File No. E95701 20-12 AWG 20-12 AWG 20-12 AWG 20-12 AWG†
Insulation Stripping Length mm (in.) 10 (.39) 10 (.39) 10 (.39) 10 (.39)
 
Accessories**: Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack
End Plate 3700.1 50 3701.1 50 3702.1 50 3756.1 20
End Stop 3748.2 50 3748.2 50 3748.2 50 3748.2 50
Isolation Partition 2957.2 20 2957.2 20 2957.2 20 - -
Screwdriver for Spring Clamp Actuation 1086.0 1 1086.0 1 1086.0 1 1086.0 1
Return to top
  ZSL 4/2A
6mm (.236 in.) Width		 ZSL 4/3A
6mm (.236 in.) Width		 ZSL 4/4A
6mm (.236 in.) Width		 ZSL 6/2A
8mm (.315 in.) Width
 
 
Dimensions:
B x W x H† mm (in.)		 64 x 6 x 42
(2.52 x .236 x 1.65)		 78.5 x 6 x 42
(3.09 x .236 x 1.65)		 93 x 6 x 42
(3.66 x .236 x 1.65)		 65 x 8 x 47.5
(2.56 x .315 x 1.87)
Ordering Information: Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack
  3525.2 100 3526.2 100 3527.2 100 3589.2 100
Return to top
Electrical Ratings:        
IEC 947-7-1 0.5-4.0mm2 0.5-4.0mm2 0.5-4.0mm2 0.5-6.0mm2
CSA/CUL File No. LR 42110 20-10 AWG 20-10 AWG 20-10 AWG 22-8 AWG†
C/US File No. E95701 20-10 AWG 20-10 AWG 20-10 AWG 22-8 AWG†
Insulation Stripping Length mm (in.) 12 (.47) 12 (.47) 12 (.47) 13 (.51)
 
Accessories**: Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack
End Plate 3703.1 50 3704.1 50 3705.1 50 3760.2 20
End Stop 3748.2 50 3748.2 50 3748.2 50 3748.2 50
Isolation Partition 2957.2 20 2957.2 20 2957.2 20 2957.2 20
Screwdriver for Spring Clamp Actuation 1086.0 1 1086.0 1 1086.0 1 1086.0 1

† Pending
*Height dimension when mounted on 35 x 7.5 DIN Rail
**For DIN Rail, marking tags and additional Accessories, See Pages XX-X, X,
Return to top

 

We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors.

About Us • FAQ • Services • Terms & Conditions • Policies

Since 1983   

Hours: Monday through Friday 8:30am through 4:00pm CST - Leave Messages On Voice Mail After Hours.
Phone: 630-682-1542          
Order Line: 800-876-1152 (USA Only, Not Illinois)
Email: sales@electrostock.com         Mail & Remit To: 1218 E. Wilson Ave. Wheaton, IL 60189-6748 USA

 Home | Contact | © 1996 - 2012 Electro-Stock, Inc | Original Design by www.mitchinson.net