you are here > Lines Carried > Conta-Clip > DIN Rail Terminal Blocks & Accessories > Spring Clamp, Feed-Through/Feed-Through with Ground/ Diode Terminal Blocks

Conta-Clip, Inc. - DIN Rail Terminal Blocks & Accessories - Spring Clamp, Feed-Through/Feed-Through with Ground/ Diode Terminal Blocks

DIN Rail Terminal Blocks & Accessories - Spring Clamp, Feed-Through/Feed-Through with Ground/ Diode Terminal Blocks

Top, Wire Entry/Clamp Access
Dual Level
Low Profile, Sectional Design

  • Mount on 35mm DIN Rail

  • Polyamide 6.6 VO

  • Stainless Steel Spring

  • Standard Color: Beige/Beige and Green

  • Jumper Provision on (2) Levels

    •

  • Plug-in Insulated Jumpers

A modern, high density terminal block system especially designed to satisfy screwless, top wire entry requirements. Top wire entry and top clamp actuation allow DIN Rail Terminal Block Assemblies to be installed into areas where available space is limited or difficult to access. A compact, low profile housing design makes them ideal for restricted height applications.
Use screwless, spring clamp terminal blocks to speed factory/field wiring and to provide significant installation cost savings.
A wide conductor range (20-8 AWG) can be accommodated and terminal blocks for two, three and four wire terminations can be selected.
 
  ZRKD 2.5
5mm (.197 in.) Width		 ZRKD 2.5 SV
5mm (.197 in.) Width		 ZRKD 2.5 DU-PE
5mm (.197 in.) Width		 ZRKD 2.5/DØ
5mm (.197 in.) Width
Overcurrent Protector
 
 
Dimensions:
B x W x H† mm (in.)		 84 x 5 x 53
(3.31 x .197 x 2.09)		 84 x 5 x 53
(3.31 x .197 x 2.09)		 84 x 5 x 53
(3.31 x .197 x 2.09)		 84 x 5 x 53
(3.31 x .197 x 2.09)
Ordering Information: Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack
  3562.2 100 3563.2 100 3565.2 100 3570.2 10
 
Electrical Ratings:        
IEC 947-7-1 500V / 24A / 0.5-2.5mm2 500V / 24A / 0.5-2.5mm2 500V /24A / 0.5-2.5mm2 øø / 0.5-2.5mm2
CSA/CUL File No. LR 42110 300V / 15A*/ 20-12 AWG 300V / 15A*/ 20-12 AWG 300V /15A*/ 20-12 AWG øø / 20-12 AWG
C/US File No. E95701 300V / 15A*/ 20-12 AWG 300V / 15A*/ 20-12 AWG 300V /15A*/ 20-12 AWG øø / 20-12 AWG
Insulation Stripping Length mm (in.) 10 (.39) 10 (.39) 10 (.39) 10 (.39)
Return to top
Accessories ††: Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack
End Plate 3756.2 20 3756.2 20 3756.2 20 3756.2 20
End Stop 3748.2 50 3748.2 50 3748.2 50 3748.2 50
 
Insulated Jumpers: Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack
2 Pole 3710.8 50 3710.8 50 3710.8 50 3710.8 50
3 Pole 3711.8 50 3711.8 50 3711.8 50 3711.8 50
4 Pole 3712.8 20 3712.8 20 3712.8 20 3712.8 20
10 Pole 3718.8 10 3718.8 10 3718.8 10 3718.8 10
Screwdriver for Spring Clamp Actuation 1086.0 1 1086.0 1 1086.0 1 1086.0 1
 
  ZRKD 2.5/LD1
5mm (.197 in.) Width
DC Voltage Indicator		 ZRKD 2.5/LD2
5mm (.197 in.) Width
DC Voltage Indicator		 ZSRK 2.5/2 A/35
5mm (.197 in.) Width
Narrow Breadth Housing		 ZRK 6/2 A
8mm (.135 in.) Width
 
 
Dimensions:
B x W x H† mm (in.)		 84 x 5 x 53
(3.31 x .197 x 2.09)		 84 x 5 x 53
(3.31 x .197 x 2.09)		 43.5 x 5 x 36.5
(1.71 x .197 x 1.44)		 65 x 8 x 47.5
(2.56 x .315 x 1.87)
Ordering Information: Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. 1131.2 Std. Pack
  3568.2 10 3569.2 10 3583.2 100 3581.2 100
Return to top
Electrical Ratings:        
IEC 947-7-1 **/ 0.5-2.5mm2 **/ 0.5-2.5mm2 800V / 24A / 0.5-2.5mm2 800V / 41A / 0.5-6mm2
CSA/CUL File No. LR 42110 **/ 20-12 AWG **/ 20-12 AWG 600V / 20A /20-12 AWG 600V / 45A / 22-8 AWG*
C/US File No. E95701 **/ 20-12 AWG **/ 20-12 AWG 600V / 20A /20-12 AWG 600V / 45A / 22-8 AWG*
Insulation Stripping Length mm (in.) 10 (.39) 10 (.39) 10 (.39) 13 (.51)
 
Accessories ††: Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack
End Plate 3756.2 20 3756.2 20 3757.2 20 3760.2 20
End Stop 3748.2 50 3748.2 50 3748.2 50 3748.2 50
 
Plug-in Insulated Jumpers: Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack
2 Pole 3710.8 50 3710.8 50 3710.8 50 3763.8 50
3 Pole 3711.8 50 3711.8 50 3711.8 50 3764.8 50
4 Pole 3712.8 20 3712.8 20 3712.8 20 3765.8 20
10 Pole 3718.8 10 3718.8 10 3718.8 10 3771.8 10
Screwdriver for Spring Clamp Actuation 1086.0 1 1086.0 1 1086.0 1 1086.0 1

*Pending **Applied Voltage 24V DC: LED Current < 5ma ø Other Diode Configurations are available øø Blocking Voltage 1000V; Current 1A; Diode IN4007
† Height Dimension when mounted on 35 x 7.5mm DIN Rail †† For DIN Rail, marking tags and additional Accessories
Feed-Through Blocks only: One (1) level on Feed-Through with Ground and Diode Blocks One (1) level on Indicator and Feed-Through Blocks
Return to top

 

We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors.

About Us • FAQ • Services • Terms & Conditions • Policies

Since 1983   

Hours: Monday through Friday 8:30am through 4:00pm CST - Leave Messages On Voice Mail After Hours.
Phone: 630-682-1542          
Order Line: 800-876-1152 (USA Only, Not Illinois)
Email: sales@electrostock.com         Mail & Remit To: 1218 E. Wilson Ave. Wheaton, IL 60189-6748 USA

 Home | Contact | © 1996 - 2012 Electro-Stock, Inc | Original Design by www.mitchinson.net