you are here > Lines Carried > Conta-Clip > DIN Rail Terminal Blocks & Accessories > Spring Clamp, Feed-Through Terminal Blocks

Conta-Clip, Inc. - DIN Rail Terminal Blocks & Accessories - Spring Clamp, Feed-Through Terminal Blocks

DIN Rail Terminal Blocks & Accessories - Spring Clamp, Feed-Through Terminal Blocks

Top, Wire Entry/Clamp Access
Low Profile, Sectional Design
Mount on 35mm DIN Rail
Polyamide 6.6 VO
Stainless Steel Spring
Standard Color: Beige
Dual Jumper Provision
Plug-In Insulated Jumpers

A modern, high density terminal block system especially designed to satisfy screwless, top wire entry requirements. Top wire entry and top clamp actuation allow DIN Rail Terminal Block Assemblies to be installed into areas where available space is limited or difficult to access. A compact, low profile housing design makes them ideal for restricted height applications.
Use screwless, spring clamp terminal blocks to speed factory/field wiring and to provide significant installation cost savings.
A wide conductor range (20-8 AWG) can be accommodated and terminal blocks for two, three and four wire terminations can be selected.
 
  ZRK 2.5/2A
5mm (.197 in.) Width		 ZRK 2.5/3A
5mm (.197 in.) Width		 ZRK 2.5/4A
5mm (.197 in.) Width		 ZRK 2.5/2 x 2A
5mm (.197 in.) Width
 
 
Dimensions:
B x W x H† mm (in.)		 59 x 5 x 39
(2.32 x .197 x 1.54)		 71.3 x 5 x 39
(2.81 x .197 x 1.54)		 83.6 x 5 x 39
(3.29 x .197 x 1.54)		 83.6 x 5 x 39
(3.29 x .197 x 1.54)
Ordering Information: Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack
  3500.2 100 3501.2 100 3502.2 100 3503.2 100
 
Electrical Ratings:        
IEC 947-7-1 800V / 24A / 0.5-2.5mm2 800V / 24A / 0.5-2.5mm2 800V / 24A / 0.5-2.5mm2 800V / 24A / 0.5-2.5mm2
CSA/CUL File No. LR 42110 600V / 27A / 20-12 AWG 600V / 27A / 20-12 AWG 600V / 27A / 20-12 AWG 600V / 27A / 20-12 AWG
C/US File No. E95701 600V / 25A / 20-12 AWG 600V / 25A / 20-12 AWG 600V / 25A / 20-12 AWG 600V / 25A / 20-12 AWG
Insulation Stripping Length mm (in.) 10 (.39) 10 (.39) 10 (.39) 10 (.39)
Return to top
Accessories**: Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack
End Plate 3700.2 50 3701.2 50 3702.2 50 3702.2 50
End Stop 3748.2 50 3748.2 50 3748.2 50 3748.2 50
 
Plug-in Insulated Jumpers: Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack
2 Pole 3710.8 50 3710.8 50 3710.8 50 - -
3 Pole 3711.8 50 3711.8 50 3711.8 50 - -
4 Pole 3712.8 20 3712.8 20 3712.8 20 - -
10 Pole 3718.8 10 3718.8 10 3718.8 10 - -
Screwdriver for Spring Clamp Actuation 1086.0 1 1086.0 1 1086.0 1 1086.0 1
 
  ZRK 4/2A
6mm (.236 in.) Width		 ZRK 4/3A
6mm (.236 in.) Width		 ZRK 4/4A
6mm (.236 in.) Width		 ZRK 4/2 x 2A
6mm (.236 in.) Width
 
 
Dimensions:
B x W x H† mm (in.)		 64 x 6 x 42
(2.52 x .236 x 1.65)		 78.5 x 6 x 42
(3.09 x .236 x 1.65)		 93 x 6 x 42
(3.66 x .236 x 1.65)		 93 x 6 x 42
(3.66 x .236 x 1.65)
Ordering Information: Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. 1131.2 Std. Pack
  3515.2 100 3516.2 100 3517.2 100 3518.2 100
Return to top
Electrical Ratings:        
IEC 947-7-1 800V / 32A / 0.5-4.0mm2 800V / 32A / 0.5-4.0mm2 800V / 32A / 0.5-4.0mm2 800V / 32A / 0.5-4.0mm2
CSA/CUL File No. LR 42110 600V / 35A / 20-10 AWG 600V / 35A / 20-10 AWG 600V / 35A / 20-10 AWG 600V / 35A / 20-10 AWG
C/US File No. E95701 600V / 33A / 20-10 AWG 600V / 33A / 20-10 AWG 600V / 33A / 20-10 AWG 600V / 33A / 20-10 AWG
Insulation Stripping Length mm (in.) 12 (.47) 12 (.47) 12 (.47) 12 (.47)
 
Accessories:** Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack
End Plate 3703.2 50 3704.2 50 3705.2 50 3705.2 50
End Stop 3748.2 50 3748.2 50 3748.2 50 3748.2 50
 
Plug-in Insulated Jumpers: Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack Cat. No. Std. Pack
2 Pole 3720.8 50 3720.8 50 3720.8 50 - -
3 Pole 3721.8 50 3721.8 50 3721.8 50 - -
4 Pole 3722.8 20 3722.8 20 3722.8 20 - -
10 Pole 3728.8 10 3728.8 10 3728.8 10 - -
Screwdriver for Spring Clamp Actuation 1086.0 1 1086.0 1 1086.0 1 1086.0 1

*Height dimension when mounted on 35 x 7.5 DIN Rail
**For DIN Rail, marking tags and additional Accessories, See Pages XX-XX
Return to top

 

We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors.

About Us • FAQ • Services • Terms & Conditions • Policies

Since 1983   

Hours: Monday through Friday 8:30am through 4:00pm CST - Leave Messages On Voice Mail After Hours.
Phone: 630-682-1542          
Order Line: 800-876-1152 (USA Only, Not Illinois)
Email: sales@electrostock.com         Mail & Remit To: 1218 E. Wilson Ave. Wheaton, IL 60189-6748 USA

 Home | Contact | © 1996 - 2012 Electro-Stock, Inc | Original Design by www.mitchinson.net