you are here > Lines Carried > Rose-Bopla > Hand Held Enclosures > TG > TG 130

Rose Bopla Enclosures - Hand Held Enclosures - TG - TG 130

 

Hand Held Enclosures - TG - TG 130

The TG 130 is a 5-part ABS enclosure consisting of: a top portion with or without a display opening; a base portion with mounting bosses and battery compartment in the rear; a battery compartment lid; and cover plates for the head and shaft area. The top portion of the enclosure is recessed for membrane keypads and features internal mounting bosses for printed circuit boards. The versions with display cut-outs come complete with display screen and punch seal. The cut-out dimensions are 45 x 17.4mm. The TG 130 is available with the bottom portion, either in a flat or deep version. The deep version adds an additional 10mm space for components. The battery compartment lid is a snap-on mechanism that attaches without screws. The battery compartment lid is also designed to accept a metal clip.
The flat version and deep version include a top part, bottom part, battery compartment lid, each with one head and shaft cover, enclosure and board mounting screws. The open version includes a display screen and punched seal. The maximum display board dimensions are approximately 65 x 29mm.
Accessories include battery holder, infrared head and shaft covers, and metal clip.

 
Technical Data
Color: green-blue, similar to RAL 5020
Material: ABS
Ingress Protection: IP40 to EN60529
Surface Resistance: 4 x 1014 Ohm to DIN 53482
Impact Resistance: 24 KV/mm to DIN 53481
Flamabillity: UL 94 HB
Membrane Keypad Ready  
Temprature Range: -40ºF up to +176ºF
 
TG 130 Handheld Enclosure Series
Download Product Drawings for the Group [PDF]
Part Number Type Length
Inches/mm
Width Top
Inches/mm
Width Bottom
Inches/mm
27010200 TG 130 FO 4.92 / 125 3.15 / 80 2.76 / 70
27010201 TG 130 FO 4.92 / 125 3.15 / 80 5.76 / 70
27010210 TG 130 TO 4.92 / 125 3.15 / 80 2.76 / 70
27010211 TG 130 TG 4.92 / 125 3.15 / 80 2.76 / 70

FO=flat open FG=flat closed TO=deep open TG=deep closed
Note: Dimensions are external. Metric is the primary dimension. Inch conversions and weights are for the user’s convenience and are for reference only. Accessories shown on drawing page.

 
 
TG hand-held enclosures are membrane-keypad ready.
   

 

We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors.

About UsFAQServicesTerms & ConditionsPolicies

Since 1983   

Hours: Monday through Friday 8:30am through 4:00pm CST - Leave Messages On Voice Mail After Hours.
Phone: 630-682-1542 
        
Order Line: 800-876-1152 (USA Only, Not Illinois)

Email: sales@electrostock.com         Mail & Remit To: 1218 E. Wilson Ave. Wheaton, IL 6018
9-6748 USA

 Home | Contact | © 1996 - 2012 Electro-Stock, Inc | Original Design by www.mitchinson.net