you are here > Lines Carried > Rose-Bopla > Machine Control Enclosures > 1300

Rose Bopla Enclosures - Machine Control Enclosures - 1300

 

Machine Control Enclosures - 1300



 

  1. Handle Attachment

  2. Clear Cover

  3. Front Panel

  4. Front Panel Seal

  5. Front Frame

  6. Frame Seal

  7. Enclosure Body

  

Rose+Bopla’s small aluminum machine control enclosures are designed for retro-fitting older machines and mills for NC and CNC controls, as well as for new equipment control packages.
     This rugged die cast aluminum housing will operate in harsh manufacturing applications where oil, cutting fluids, vibration and shock are normal, everyday conditions.
    The rear section is a rugged die cast aluminum base. The front bezel is a die cast aluminum frame with a removable clear anodized aluminum face plate. The base, front bezel and front face plate are all gasketed with neoprene gaskets to seal out oil, water and cutting fluids.
     The face plate is easily removed for machining, silkscreening, and engraving.
     Two types of handles are offered for most models–2 separate handles, or a ¾ wrap-around handle that can be mounted vertically or horizontally.
     A front bezel with a beveled frame, specially designed for membrane front panels, is available for most sizes. Clear transparent doors, with snap latch or key operated locking latch, are available for most sizes. This viewing door is a protective cover and is not NEMA rated. We strongly recommend the installation of internal hinges with each small machine control housing. These hinges are invisible when the unit is operational, but allow the front panel to swing to the side, or drop down like a tray when the front bezel is opened for service access.
     This system is designed to be used with the Rose+Bopla suspension arm systems 4949, 4951, 4961, and 4981.
Technical Data
Color: Body, agate gray, similar to RAL 7038. Bezel, transport gray, similar to RAL 7043. Special colors available on request.
Material: Enclosure body, die cast aluminum, AL Si 12. Bezel, die cast aluminum AL Si 12. Front panel, anodized sheet aluminum, 3mm thick.
Gasket Material: Neoprene
Protection Classifications: IP 65 to EN 60529 
NEMA 12
Temperature range: -40º F up to +194º F
Impact Resistance: >7Nm, EN 50014 for enclosure body
Small Machine Control Enclosures-1300 Series
Part Number Length
Inches/mm		 Width
Inches/mm		 Height
Inches/mm		 Weight lbs.
13050000 00 3.94 / 100 9.06 / 230 5.09 / 129 4.78
13070000 00 6.30 / 160 10.24 / 260 4.29 / 109 4.72
13080000 00 6.30 / 160 14.17 / 360 4.29 / 109 6.02
13090000 00 6.30 / 160 22.05 / 560 4.29 / 109 11.88
13100000 00 7.95 / 202 9.13 / 232 5.08 / 139 6.83
13110000 00 7.95 / 202 9.13 / 232 7.79 / 198 9.91
13120000 00 12.99 / 330 9.06 / 230 5.08 / 129 10.19
13130000 00 12.99 / 330 9.06 / 230 7.83 / 199 13.56
13140000 00 15.75 / 400 9.06 / 230 5.08 / 129 11.70
13150000 00 15.75 / 400 9.06 / 230 9.57 / 243 15.08
13160000 00 23.62 / 600 9.06 / 230 5.08 / 129 14.44
13170000 00 11.02 / 280 9.06 / 230 5.08 / 129 8.82
13200000 00 15.91 / 404 12.32 / 313 5.08 / 129 14.08
13210000 00 15.91 / 404 12.32 / 313 7.83 / 199 18.11
13220000 00 23.62 / 600 12.20 / 310 5.08 / 129 21.43
13230000 00 23.62 / 600 12.20 / 310 7.83 / 199 22.71
13240000 00 15.91 / 404 12.32 / 313 9.65 / 245 19.18
13250000 00 15.89 / 403 12.28 / 312 6.26 / 159 15.62

Note: Dimensions are external. Metric is the primary dimension. Inch conversions are for the user’s convenience and are for reference only. 
Accessories shown on drawing page.
Download Product Drawings for the Group

 

We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors.

About Us • FAQ • Services • Terms & Conditions • Policies

Since 1983   

Hours: Monday through Friday 8:30am through 4:00pm CST - Leave Messages On Voice Mail After Hours.
Phone: 630-682-1542  Fax: 630-682-1562             Order Line: 800-876-1152 (USA Only, Not Illinois)
Email: sales@electrostock.com         Mail & Remit To: 1218 E. Wilson Ave. Wheaton, IL 60189-6748 USA

 Home | contact | © 1996 - 2008 Electro-Stock, Inc | Original Design by www.mitchinson.net | Licensed under a Creative Commons Attribution 3.0 License