you are here > Lines Carried > Rose-Bopla > EX Enclosures > Ex-IGS Stainless Steel with Hinges

Rose Bopla Enclosures - EX Enclosures - Ex-IGS Stainless Steel with Hinges

 

EX Enclosures - Ex-IGS Stainless Steel with Hinges
 

The Rose+Bopla Ex Stainless Steel cabinets are second to none in reliability and appearance. These enclosures house electrical and electronic applications in hazardous locations in medicine, food preparation, pharmaceutics, wood and pulp mills, chemical environments, the entire petrochemical industry and many others.
     The material is a 301 (1.4301), with 316L (1.4404) as an option, 18 gauge grade stainless which is one of the most corrosive resistant materials used in popular enclosures. The seams are welded, ground smooth and then the entire cabinet is polished to a 240 grit finish. The silicone seal on the cover rests on a 15mm high lip on the bottom that is bent to an outward 10° angle so that nothing will accidentally enter the enclosure when the door is opened. This design aids in water run off so that there will be no ice build up. There is no need for costly sloped roof accessories. 
     Off the shelf cabinets feature stainless steel hinges, a stainless steel locking system, foam-in silicone seal, equipment mounting rails inside, mounting holes on back, an external ground. EMC gasketing and custom sizes are available on request. These cabinets are certified to the ATEX guidelines and will work for increased and intrinsically safe design.
     Rose+Bopla will machine the enclosure and install ATEX certified conduit hubs and/or cable glands, feed through terminals, and other ATEX components to make sure your system is compliant and marketable worldwide.

Technical Data
Surface Finish: 240 grain polished finish
Material: Stainless Steel 304(1.4301) or 316L(1.4404) as an option, 1.25mm thick. 
Gasket Temperature Range: -4º F to +104º F
Gaskets: Silicone Foam Gasket
EMC (on request)
Ingress Protection: IP 65 to EN 60529
Explosion Protection: AEx e II T6
AEx i II T6
Impact Resistance: >7Nm, EN 50014
Approvals: Empty enclosure: PTB 00 ATEX 1101U
Terminal enclosure: PTB 00 ATEX 1052
UL File #E203312 
EX-IGS Stainless Steel Enclosures with Hinges
Part Number Width
Inches/mm
Length
Inches/mm
 Height
Inches/mm
Weight
lbs
34002209 00 9.84 / 250 7.87 / 200 3.82 / 97 5.18
34002215 00 9.84 / 250 7.87 / 200 6.18 / 157 5.78
34003209 00 9.84 / 250 13.78 / 350 3.82 / 97 7.69
34003316 00 11.81 / 300 11.81 / 300 6.18 / 157 9.61
34004416 00 14.96 / 380 14.96 / 380 6.18 / 157 13.40
34004421 00 14.96 / 380 14.96 / 380 8.54 / 217 15.03
34005316 00 11.81 / 300 19.68 / 500 6.18 / 157 14.00
34006316 00 11.81 / 300 23.62 / 600 6.18 / 157 19.29
34006421 00 14.96 / 380 23.62 / 600 854 / 217 25.17

Custom sizes available.
Note: Dimensions are external. Metric is the primary dimension. Inch conversions and weights are for the user’s convenience and are for reference only. *Change prefix to 35 for Exe Version, or 36 for Exi version. For example: 34002209 would become 35002209.

 

We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors.

About UsFAQServicesTerms & ConditionsPolicies

Since 1983   

Hours: Monday through Friday 8:30am through 4:00pm CST - Leave Messages On Voice Mail After Hours.
Phone: 630-682-1542  Fax: 630-682-1562             Order Line: 800-876-1152 (USA Only, Not Illinois)

Email: sales@electrostock.com         Mail & Remit To: 1218 E. Wilson Ave. Wheaton, IL 6018
9-6748 USA

 Home | contact | © 1996 - 2008 Electro-Stock, Inc | Original Design by www.mitchinson.net | Licensed under a Creative Commons Attribution 3.0 License