you are here > Lines Carried > Rose-Bopla > Hand Held Enclosures > Tastomat

Rose Bopla Enclosures - Hand Held Enclosures -  Tastomat

 

Hand Held Enclosures - Tastomat

The Tastomat was developed specifically for use as factory floor control units in tough operating conditions. This enclosure offers ample space for many standard applications. Tastomat is gasketed to provide an ingress protection rating of IP 65 and is made of glassbead-reinforced polyamide. These two factors offer optimal protection for your electronic components even under the most demanding circumstances. 
     The wrap around 5mm recessed front panel area gives a high degree of protection for fitted operating elements against unintentional operation or destruction. Molded-in ribs in the bottom half of the enclosure are designed for easier handling. 
     Drill holes in the base can be used for wall-mount applications. Six M4 x 62 assembly screws secure the housing together from the rear. Four internal mounting bosses with M3 threaded inserts accept screws for mounting plates.
 
Technical Data
Color: Light gray, similar to RAL 7035; special colors and minimum order quantities on request
Material: Polyamide, 30% glassbead-reinforced
Ingress Protection: IP 65 / DIN VDE 0470; NEMA 12
Flammability: UL 94 HB/1.6
Membrane Keypad Ready  
Note: In case of prolonged heat (167°F for 3 hours ) an after shrinkage of up to 0.8% is possible. To a similar extent, absorption of humidity may affect dimensions.
 
Tastomat Handheld Enclosure Series
Download Product Drawings for the Group [PDF]
Model Number Part Number Length
(Inches/mm)		 Width Top
(Inches/mm)		 Width Bottom
(Inches/mm)		 Weight
lbs.
TAS 100 08100000 9.88 / 251 3.58 / 91 1.81 / 46 .752
TAS 200 08200000 9.88 / 251 3.58 / 91 3.15 / 80 1.039

Note Dimensions are external. Metric is the primary dimension. Inch conversions are for the user's convenience and are for reference only.
 
Tastomat is the ideal enclosure for use in crane control or industrial machine
control applications.		 Tastomat is the ideal enclosure for use for a membrane
keypad or display applications.

 

We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors.

About Us • FAQ • Services • Terms & Conditions • Policies

Since 1983   

Hours: Monday through Friday 8:30am through 4:00pm CST - Leave Messages On Voice Mail After Hours.
Phone: 630-682-1542          
Order Line: 800-876-1152 (USA Only, Not Illinois)
Email: sales@electrostock.com         Mail & Remit To: 1218 E. Wilson Ave. Wheaton, IL 60189-6748 USA

 Home | Contact | © 1996 - 2012 Electro-Stock, Inc | Original Design by www.mitchinson.net