you are here > Lines Carried > Rose-Bopla > Hand Held Enclosures > TG

Rose Bopla Enclosures - Hand Held Enclosures - TG

 

Hand Held Enclosures - TG

In data acquisition and measuring applications, mobility and functionality are essential factors in making a system successful. The new TG enclosure series offers cost-effective, basic components for applications ranging from manual data input to electronic data acquisition using scanners or chip cards.
     TG 130, the smaller enclosure system in the series, has been effectively used for magnetic card devices, as well as for positioning apparatus in laboratories and in medical applications. 4 versions are available: a flat design with or without a display cut-out; a deeper design with increased mounting height for additional boards or electromechanical components, with or without a display cut-out. This enclosure consists of a top and bottom part with a battery compartment and lid and is designed to accommodate membrane keypads. There are 2 cover plates in the head and shaft sections to facilitate customizing for interface modules or slots for card inserts. 
     The ergonomically shaped TG 180/230 enclosures consist of a top and bottom part with a keypad plate, head and shaft cover plate. Battery compartment must be ordered separately. They are available in a closed and an open version (with display cutout). The variable display attachment set allows for mounting different sized displays. The maximum display board dimensions for TG-180 are 66 x 46mm; TG 230, 78 x 56mm. For maximum mobility, a 4.8V Ni-Cd battery pack is available and can be replaced using a simple snap-on mechanism. Accessories for the TG180/230 include a charging station, silicone switching mat, wrist strap, and transparent head cover for use with scanners.

Technical Data
Color: Enclosure body–green-blue, similar to RAL 5020;
Models 180/230–keypad plate, battery compartment/pack– black-gray similar to RAL 7021
Material: ABS
Ingress Protection: IP40 to EN60529
Surface Resistance: 4 x 1014 Ohm to DIN 53482
Impact Resistance: 24 KV/mm to DIN 53481
Flamabillity: UL 94 HB
Membrane Keypad Ready  
Temprature Range: -40ºF up to +176ºF
TG Handheld Enclosure Series
Download Product Drawings for the Group
Part Number Type Length
Inches/mm		 Width Top
Inches/mm		 Width Bottom
Inches/mm
27010200 00 TG 130 FO 4.92 / 125 3.15 / 80 2.76 / 70
27010201 00 TG 130 FG 4.92 / 125 3.15 / 80 2.76 / 70
27010210 00 TG 130 TO 4.92 / 125 3.15 / 80 2.76 / 70
27010211 00 TG 130 TG 4.92 / 125 3.15 / 80 2.76 / 70
27010400 00 TG 180 O 7.09 / 180 3.31 / 84 2.76 / 70
27010401 00 TG 180 G 7.09 / 180 3.31 / 84 2.76 / 70
27010600 00 TG 230 O 9.02 / 229 3.82 / 97 2.76 / 70
27010601 00 TG 230 G 9.02 / 229 3.82 / 97 2.76 / 70

FO=flat open   FG=flat closed   TO=deep open   TG=deep closed   O=open   G=closed
Note: Dimensions are external. Metric is the primary dimension. Inch conversions are for the user’s convenience and are for reference only. Accessories shown on drawing page.
 

TG 130
Cover plates for interface
modules
or chip card scanners.
TG 180
Large head covers for
laser scanners.		      

 

We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors.

About Us • FAQ • Services • Terms & Conditions • Policies

Since 1983   

Hours: Monday through Friday 8:30am through 4:00pm CST - Leave Messages On Voice Mail After Hours.
Phone: 630-682-1542  Fax: 630-682-1562             Order Line: 800-876-1152 (USA Only, Not Illinois)
Email: sales@electrostock.com         Mail & Remit To: 1218 E. Wilson Ave. Wheaton, IL 60189-6748 USA

 Home | contact | © 1996 - 2008 Electro-Stock, Inc | Original Design by www.mitchinson.net | Licensed under a Creative Commons Attribution 3.0 License