you are here > Lines Carried > Rose-Bopla > Hand Held Enclosures > Limanda Handheld Operating Enclosure

Rose Bopla Enclosures - Hand Held Enclosures - Limanda Handheld Operating Enclosure

 

Hand Held Enclosures - Limanda Handheld Operating Enclosure

Designed for electronic data acquisition and operating systems used in medical technology, instrumentation and control, as well as in automation technology, the truly innovative LIMANDA handheld operating enclosure system is offered by Rose+Bopla. 
     LIMANDA is a two-shell panel enclosure offering IP 65 protection and can be used as a mobile, stationary or semi-stationary system for compact electronics in an upright or a horizontal position.
     The break-proof polyamide enclosure comes with three interface compartments in the rear to accomodate connectors and electronic components.
     Two recessed screw-on chambers enable adaptation to equipment mounting systems or can be used to accommodate ventilation devices.
     When intermediate frames are used, LIMANDA’s mounting space can be varied in depth. LIMANDA includes a lid and base as standard. Supplementing the standard product line, a wide variety of accessories, including front panels, stationary mounting adapters, handle sets, and expansion frames are also available.

Technical Data
Color: Black-gray, similar to RAL 7021.
Protection Classifications: IP 65 to EN 60529.
NEMA 12
Temperature range: -4ºF up to +140ºF.
Material: Enclosure: Polyamide.
Front panel: Anodized Aluminum.
Front panels must be ordered separately.
Gasket: Neoprene
Surface resistance: 1012 Ohm to DIN 53482.
Flammability: UL 94 V2.
Disruptive Strength: >7Nm to DIN 50014.

Download Product Drawings for the Group

Part Number Length (Inches/mm) Width (Inches/mm)  Height (Inches/mm)
27030200 00 10.62 / 270 9.76 / 248 2.51 / 94
27030300 00 12.24 / 311 11.06 / 281 2.83 / 72

Note: Dimensions are external. Metric is the primary dimension. Inch
conversions are for the user’s convenience and are for reference only.
Accessories are listed on drawing page.
LIMANDA Construction

Battery Compartment–Four AAA or six AA batteries can be housed in the handle.

Interface ports–Locking flaps cover the three rear interface ports. These ports are used for the attachment of interfaces, plug connectors, external components, or PCMCIA connections.
 

Handle Set–In mobile applications, the LIMANDA handle provides additional carrying comfort. This accessory is attached by means of a threaded joint to any of the four corners of the enclosure.
Cable Connection– LIMANDA can be used in both the horizontal and vertical positions. Cable attachments should lead away from the operator for proper ergonomic and comfortable use. For this reason, sloped surfaces are a standard feature on all four corners, designed to hold cable glands.
Adapter for Stationary Mounting–LIMANDA can also be used as a stationary control enclosure. The angle can be adjusted with a knurled thumb screw.

 

We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors.

About Us • FAQ • Services • Terms & Conditions • Policies

Since 1983   

Hours: Monday through Friday 8:30am through 4:00pm CST - Leave Messages On Voice Mail After Hours.
Phone: 630-682-1542  Fax: 630-682-1562             Order Line: 800-876-1152 (USA Only, Not Illinois)
Email: sales@electrostock.com         Mail & Remit To: 1218 E. Wilson Ave. Wheaton, IL 60189-6748 USA

 Home | contact | © 1996 - 2008 Electro-Stock, Inc | Original Design by www.mitchinson.net | Licensed under a Creative Commons Attribution 3.0 License