you are here > Lines Carried > Rose-Bopla > Build-A-Box > Aluminum Extrusions Custom

Rose Bopla Enclosures - Build-A-Box - Aluminum Extrusions - Custom

 

Build-A-Box - Aluminum Extrusions - Custom

Rose+Bopla Custom Build-A-Box® is a series of extrusions that can be cut to any length from stock extrusions, and assembled with dustight or watertight lids as required. This offers a quick rugged housing for today’s engineers. Originally designed to house standard VME Bus Cards/Euro Cards in our off-the-shelf pre-packaged models, the extrusions and lids in the Custom Build-A-Box® program offer engineers much greater design
possibilities.
     Custom Build-A-Box® lets you decide on the size of your enclosure based on your application. First choose the profile you wish to use, then consider all the options to complete your project; length of box, type of lid, type of finish, secondary services, accessories, or the placement of PC Boards. The Build-A-Box® system allows for printed circuit boards to be inserted along the integrated guide rails. These profiles can be configured in basically two different types of designs: dustight enclosures with IP 40 protection, using sheet metal lids without a gasket; and watertight enclosures with IP 65 protection, using die-cast aluminum lids with a gasket. 
     Rose+Bopla stocks bare aluminum extrusion in 1-meter lengths and sells it by the meter. These profiles are available in 8 sizes. Finishing, painting, machining and other secondary services are sold by the box. Dustight lids, watertight lids, and accessories are sold separately. Assembly hardware and gaskets are supplied as required. 
     Dustight lids are stamped from aluminum plate. Watertight lids are die-cast aluminum and come with a neoprene gasket that is oil and gasoline resistant. EMI/RFI shielded gaskets are available for all watertight Build-A-Box® versions by special request. Minimum order may apply.
Technical Data
Material: Bare Aluminum extrusion AL Mg Si 0.5
Temperature Range: -40ºF up to +212ºF with aluminum plate lids
-22ºF up to +176ºF with die-cast aluminum lids
Screws: Stainless Steel Lid Screws
Internal mounting plates are not available for this enclosure series.
Protection Classifications: IP 40 to EN 60529 (dustight) with aluminum plate lids
IP 65 to EN 60529 (watertight) with die-cast aluminum lids
Aluminium Extrusions - Custom Build-A-Box®
 
Part Number Length (Inches/mm) Width (Inches/mm) Height (Inches/mm) P.C. Card Slot Sizes
07011100 10 39.37 / 1000 5.12 / 130 1.77 / 45 100 mm
07021100 20 39.37 / 1000 5.13 / 130 2.71 / 69 100 mm
07031100 30 39.37 / 1000 7.72 / 196 4.17 /106 100 mm / 160
07051100 50 39.37 / 1000 4.09 / 104 3.31 / 84 100 mm / 80.5
07061100 60 39.37 / 1000 6.50 / 165 4.13 / 105 100mm / 160
07071100 70 39.37 / 1000 7.68 / 195 6.55 / 166 160 mm / 189.5
07101102 30 39.37 / 1000 5.67 / 144 2.66/  67 100mm
07111102 40 39.37 / 1000 5.67 / 144 1.69 / 43 100 mm

Note: Dimensions are external. Metric is the primary dimension.
Inch conversions are for the user's convenience and are for reference only.
All extrusions sold in 1-meter lengths.

 

We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors.

About Us • FAQ • Services • Terms & Conditions • Policies

Since 1983   

Hours: Monday through Friday 8:30am through 4:00pm CST - Leave Messages On Voice Mail After Hours.
Phone: 630-682-1542          
Order Line: 800-876-1152 (USA Only, Not Illinois)
Email: sales@electrostock.com         Mail & Remit To: 1218 E. Wilson Ave. Wheaton, IL 60189-6748 USA

 Home | Contact | © 1996 - 2012 Electro-Stock, Inc | Original Design by www.mitchinson.net