you are here > Lines Carried > American Electrical > Cable Grips > Synthetic / Nylon

American Electrical, Inc. Cable Grips - Synthetic / Nylon

 

 

 

 

Cable Grips - Synthetic / Nylon
Main Features: Cable Grips

  • Wider domed nut which can not be over-tightened. The wide dome design allows space for the neoprene seal to form a tight grip on the cable, forming an IP68 barrier. (please refer to Ingress Protection [IP] ratings on the back page.)

  • Generous deep flats: The deep flats allow enough room for the proper wrench to tighten or loosen the cable grip without the wrench coming off.

  • Spacer: A small spacer exists between the domed nut and the locking collett, providing an additional seal when fully tightened.

  • Neoprene rubber seal: This seal grips around the cable to form the IP68 barrier when properly tightened.

  • Webs are staggered for better grip: Webs are designed in an alternating geometry which enhances gripping capability.

  • Staggered webs: The web design is staggered to allow for seal conformity around the cable to maximize the pull out resistance and protection against the elements.

  • Sprung webs: The webs are designed so that they will spring back to their original open position making installation easy while maintaining the seal quality.

  • Retention springs for domed nut: The ‘Tight Seal’ design allows the domed nut to lock with the collett before any threads are engaged. This guards against mis-threads as well as aids in the installation process.

  • Sealing lip: The collett design incorporates a sealing lip which provides for a positive seal against the enclosure.

  • Anti-Twist cable locking collett: The entire design of the ‘Tight Seal’ product line insures that cables will not twist or turn once locked down.
Technical Data
Material: Polyamide PA 6, self-extinguishing, halogen free
Seal: Neoprene, oil and petroleum resistant
Operating temperature: Static: –40°C to 100°C, short-term 120°C
Dynamic: –30°C to 80°C, short-term 100°C
Weather resistance: good
Strain relief: Smooth action
Safety Class: IP68, waterproof (5 bar)
Patents: Europe, USA, Japan
VDE Test Report: 12 796-9000-4001/A 2 J.

UL test (Underwriters Laboratories Inc.)
Lloyd’s Register of Shipping certificate
Germanische Lloyd certificate
   
IP68 Nylon Cable Grips
Cable Diameter Wrench Size Dimensions Thread Type
PG NPT Metric
H L Size Part No Size inch Part No Size mm Part No
inches Ø mm Ø mm mm mm gray black gray black gray black
0.10-0.26 2.5-6.5 15 21 8 7 1555.07.06 1545.07.06 - - - 12x1.5 1555.12.06 1545.12.06
0.12-0.31 3.0-8.0 19 23 8 9 1555.09.08 1545.09.08 3/8 1555.N0375.08 1545.N0375.08 16x1.5 1555.17.08 1545.17.08
0.08-0.28 2.0-7.0 22 22 8 11 1555.11.07 1545.11.07 - - - - - -
0.16-0.39 4.0-10.0 22 22 8 11 1555.11.10 1545.11.10 - - - - - -
0.12-0.28 3.0-7.0 24 26 9 13 1555.13.07 1545.13.07 1/2 1555.N0500.07 1545.N0500.07 20x1.5 1555.20.07 1545.20.07
0.22-0.47 5.5-12.0 24 26 9 13 1555.13.12 1545.13.12 1/2 1555.N0500.12 1545.N0500.12 20x1.5 1555.20.12 1545.20.12
0.20-0.43 5.0-11.0 27 30 10 16 1555.16.11 1545.16.11 - - - - - -
0.33-0.55 8.5-14.0 27 30 10 16 1555.16.14 1545.16.14 - - - - - -
0.26-0.55 6.5-14.0 33 35 11 21 1555.21.14 1545.21.14 3/4 1555.N0750.14 1545.N0750.14 25x1.5 1555.25.14 1545.25.14
0.43-0.71 11.0-18.0 33 35 11 21 1555.21.18 1545.21.18 3/4 1555.N0750.18 1545.N0750.18 25x1.5 1555.25.18 1545.25.18
0.67-0.87 17.0-22.0 42 36 15 - - - 1 1555.N1000.22 1545.N1000.22 - - -
0.67-0.98 17.0-25.0 42 36 11 29 1555.29.25 1545.29.25 - - - 32x1.5 1555.32.25 1545.32.25
0.87-1.30 22.0-33.0 53 48 15 36 1555.36.33 1545.36.33 - - - - - -
1.10-1.50 28.0-38.0 60 48 15 42 1555.42.38 1545.42.38 - - - - - -
1.26-1.73 32.0-44.0 65 48 15 48 1555.48.44 1545.48.44 - - - - - -

Lock Nuts Provided with Cable Grips
   
IP68 Nylon Strain Relief Cable Grips
Cable Diameter Wrench Size Dimensions Thread Type
PG NPT Metric
H L Size Part No Size inch Part No Size mm Part No
inches Ø mm Ø mm mm mm gray black gray black gray black
0.10-0.26 2.5-6.5 15 54 8 7 1576.07.06 1546.07.06 - - - 12x1.5 1576.12.06 1546.12.06
0.12-0.31 3.0-8.0 19 64 8 9 1576.09.08 1546.09.08 3/8 1576.N0375.08 1546.N0375.08 16x1.5 1576.17.08 1546.17.08
0.08-0.28 2.0-7.0 22 77 8 11 1576.11.07 1546.11.07 - - - - - -
0.16-0.39 4.0-10.0 22 77 8 11 1576.11.10 1546.11.10 - - - - - -
0.12-0.28 3.0-7.0 24 88 9 13 1576.13.07 1546.13.07 1/2 1576.N0500.07 1546.N0500.07 20x1.5 1576.20.07 1546.20.07
0.22-0.47 5.5-12.0 24 88 9 13 1576.13.12 1546.13.12 1/2 1576.N0500.12 1546.N0500.12 20x1.5 1576.20.12 1546.20.12
0.20-0.43 5.0-11.0 27 102 10 16 1576.16.11 1546.16.11 - - - - - -
0.33-0.55 8.5-14.0 27 102 10 16 1576.16.14 1546.16.14 - - - - - -

Lock Nuts Provided with Cable Grips
Please see the Knockout Hole Sizes for Cable Grips section for more information.

 

We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors.

About Us • FAQ • Services • Terms & Conditions • Policies

Since 1983   

Hours: Monday through Friday 8:30am through 4:00pm CST - Leave Messages On Voice Mail After Hours.
Phone: 630-682-1542          
Order Line: 800-876-1152 (USA Only, Not Illinois)
Email: sales@electrostock.com         Mail & Remit To: 1218 E. Wilson Ave. Wheaton, IL 60189-6748 USA

 Home | Contact | © 1996 - 2012 Electro-Stock, Inc | Original Design by www.mitchinson.net